ARCALOY 308/308H-16Arcaloy 308/308H-16 electrodes were designed for the welding Types 304H & 304 where temperature in excess of 700°F (371°C) requires additional creep strength. They can equally well be used for the welding of stainless steel Types 301, 302 and 305.
ARCALOY 308L-15Arcaloy 308L-15 electrodes were developed for the welding of Type 304L stainless steels but can be used for many other stainless steels including Types 301, 302 & 304.
ARCALOY 308L-16Arcaloy 308L-16 electrodes were developed for the welding of Type 304L stainless steels but can be used for many other stainless steels including Types 301, 302 & 304. They are used extensively for the welding of chemical plant equipment and may be used successfully for the welding of Types 321 and 347 stainless steels provided the service temperature is less than about 700°F(375°C).
ARCALOY 308L-17 PLUSArcaloy 308L-17 Plus electrodes have a heavy coating, produce a concave bead with minimum ripple and the slag is virtually self-cleaning. These electrodes are designed to weld Types 304, 304L, 321 and 347 for corrosion service at temperature up to about 600°F(315°C).The excellent wetting action and very fine ripple minimize crevice corrosion and grinding time.
ARCALOY 309/309H-16Arcaloy 309/309H-16 is used for welding base metal for all service temperatures designed for Type 309. Carbon content 0.04% minimum. It can be used for carbon and low alloy steels and stainless steel … [Read more]
ARCALOY 309L-15Arcaloy 309L-15 is used for welding carbon and low alloy steels to stainless steels. This can be done provided the service temperature does not exceed about 700°F (370°). Post weld heat treatment should only be taken with great care.
ARCALOY 309L-16Arcaloy 309L-16 is used for welding carbon and low alloy steels to stainless steels. This can be done provided the service temperature does not exceed about 700°F (370°C). Post weld heat treatment sho … [Read more]
ARCALOY 316/316H-16Arcaloy 316/316H-16 should be used in applications where Type 316 stainless steel needs improved high temperature. In some cases an E16-8-2 filler metal should be used. It can also be used to weld Typ … [Read more]
ARCALOY 316L-17 PLUSArcaloy 316L-17 Plus electrodes have a heavy coating and produce a concave bead with minimal ripple. The slag is virtually self-cleaning. Molybdenum increases the resistance to pitting corrosion caused by corrosive media such as sulfuric and sulfurous acids, sulphites, chlorides and cellulose solutions.
ARCALOY 316LF5-15Arcaloy 316LF-15 is a 316L electrode designed to give a weld deposit with a minimum ferrite number of 5 FN. Carbon content is 0.04% maximum and can be used to weld Type 304L stainless steal where the … [Read more]
ARCALOY 316LF5-16Arcaloy 316LF5-16 is an E316L-16 electrode where the composition has been balanced to give a weld deposit with a minimum ferrite content of 5 FN. It can be used to weld Type 304L stainless steel where … [Read more]
ARCALOY 317L-16Arcaloy 317L-16 electrodes are recommended for welding type 317 and 317L with a maximum 0.04% carbon in the weld deposit. The higher molybdenum content of these electrodes as compared to Arcaloy type … [Read more]
ARCALOY 320LR-16Arcaloy 320LR-16 electrodes are designed for the welding of Carpenter 20Cb-3® and equivalent stainless steels. This electrode is specifically designed to resist the hot cracking and microfissuring often encountered when welding fully austenitic stainless steels.
ATOM ARC 10018Atom Arc 10018 electrodes are used primarily for applications which require weld joints of at least 100 ksi (690 MPa) tensile strength, good ductility and crack resistance. Good notch toughness at temperatures as low as -60°F (-51°C) is possible with this electrode.
ATOM ARC 12018Atom Arc 12018 is recommended for use in fabrication of low-alloy, high tensile steels where welds of 120 ksi (830 MPa) minimum tensile strength are required. Atom Arc 12018 is typically used to weld … [Read more]
ATOM ARC 7018Atom Arc 7018 is an all-position low hydrogen moisture resistant electrode. The wider operating ranges and smooth weld metal transfer minimizes post weld clean up. This premium quality electrode meets a multitude of codes and welding specifications.
ATOM ARC 7018 AcclaimThis newest addition to the family offers the deep, penetrating arc and tough mechanical properties of the original Atom Arc 7018 with greater puddle control resulting in ease of use in out-of-position welding applications and superior arc initiation desired by many newer welders.
ATOM ARC 7018-1Atom Arc 7018-1 is an all-position, low hydrogen electrode that provides exceptional impact toughness at low service temperatures. Atom Arc 7018-1 provides smooth metal transfer, minimal spatter, and easy slag removal.
ATOM ARC 7018-ACAtom Arc 7018-AC is a product specifically designed to have optimum arc characteristics when used with AC power sources having an open circuit voltage of 75 to 80V. Compared to standard Atom Arc 7018 operating on AC, this electrode will have easier arc starting and restrike, a smoother arc and lower spatter.
ATOM ARC 7018-B2LAtom Arc 7018-B2L is a 1 1/4 Cr – 1/2 Mo electrode with sensitivity extra low carbon content. The low carbon content in the weld metal is beneficial in reducing cracking of weldments. Atom Arc 7018-B2L is carefully engineered to produce a stable arc and good slag release when welding low-alloy steels in the categories of 0.5% Cr – 0.5% Mo, 1% Cr – 0.5% Mo, 1.25% Cr – 0.5% Mo steels.
ATOM ARC 7018-MoAtom Arc 7018-Mo electrodes contain 0.5% Mo as alloy addition. They are recommended for welding low-alloy, high tensile steels of 50 ksi (345 MPa) minimum yield strength and also 0.5% Molybdenum steels and pipes.
ATOM ARC 7018-SRAtom Arc 7018-SR is an all-position low hydrogen electrode. The moisture resistance and welder appeal is similar to other Atom Arc electrodes. Atom Arc 7018-SR was developed to maintain 70 ksi (483 MP … [Read more]
ATOM ARC 8018Atom Arc 8018 electrodes deposit 1% Ni weld metal. They are used primarily to weld high-tensile steels in the 70-80 ksi (483-552 MPa) tensile strength range, especially where notch toughness at temper … [Read more]
ATOM ARC 8018-B3LAtom Arc 8018-B3L electrodes contain 2.25% Cr and 1% Mo alloy additions with low carbon content. The electrode is designed for welding 2.25% Cr – 1% Mo steels. The rod operates with a very stable arc and minimal spatter.
ATOM ARC 8018-B6Atom Arc 8018-B6 is designed to weld 5% Cr -0.5% Mo creep resisting steels such as ASTM A387 Grade 5, A213-T5 and A335-P5. These steels are normally used in pressure vessels and piping for high temper … [Read more]
ATOM ARC 8018-B6LAtom Arc 8018-B6L deposits a low carbon 5% Cr, 0.5% Mo weld metal. It is designed for welding ASTM A200-T5, A335-P5, A387-Gr5 and similar steels. Applications tend to be in the petrochemical and petroleum industries, especially where hydrogen attack accelerates metal failure.
ATOM ARC 8018-B8Atom Arc 8018-B8 is designed to weld 9% Cr – 1% Mo creep resisting steels such as ASTM A213-T9 and A335-P9. These steels are used in pressure vessels and piping for high temperature service.
ATOM ARC 8018-C1Atom Arc 8018-C1 electrodes deposit weld metal which contains nominal 2.33% Ni. Their principal use is in the welding of nickel-bearing steels for low temperature applications where toughness of the w … [Read more]
ATOM ARC 8018-CMAtom Arc 8018-CM electrodes contain 1.25% Cr and 0.50% Mo as alloy addition. They are used for the welding of such steels as 0.5% Cr – 0.5% Mo, 1% Cr – 0.5% Mo, and 1.25% Cr – 0.5% Mo, which are used … [Read more]
ATOM ARC 8018-SRAtom Arc 8018-SR is an all-position low hydrogen electrode. The moisture resistance and welder appeal is similar to other Atom Arc electrodes. Atom Arc 8018-SR was developed to maintain 80 ksi (552 MP … [Read more]
ATOM ARC 9015-B9Atom Arc 9015-B9 is designed to weld the modified 9% Cr & 1% Mo steels known by the designations T91, P91 or Grade91. These steels are designed to provide improved creep strength, fatigue, oxidation, … [Read more]
ATOM ARC 9018Atom Arc 9018 electrodes are used for attachment welds on T-1, HY-80 and HY-90 steels and other high tensile, quenched and tempered steels.
ATOM ARC 9018-B9Atom Arc 9018-B9 is designed to weld the modified 9% Cr – 1% Mo steels known by the designations T91, P91 or Grade 91. These steels are designed to provide improved creep strength, toughness, fatigue, … [Read more]
ATOM ARC 9018-CMThe principal application of Atom Arc 9018-CM electrodes is for welding 2.5% Cr – 1% Mo steels commonly found in pressure vessels, heat exchangers, pipings and other related components.
ATOM ARC-TAtom Arc T was developed for welding T-1 steel in all applications. Mechanical properties of the welded joints equal or exceed the properties of the base steel in either the as welded or stress relieved condition, thus giving 100% design joint efficiency.
Arcaloy 309L-17 PlusArcaloy 309L-17 Plus electrodes have a heavy coating and produce a concave bead with minimal ripple. The slag is virtually self-cleaning. For welding carbon steel to stainless steel for service below … [Read more]
SUREWELD 10PThe red coated Sureweld 10P is an all-position cellulosic electrode developed for the pipe welding industry in order to improve ductility in the weld deposit while maintaining the standard welding characteristics needed for a pipe welding electrode.
SUREWELD 10P PLUSSureweld 10P-Plus is a modified version of the standard 10P electrode and can be differentiated by its gray coating. It has also been developed for the pipe welding industry but has a more consistent burn-off and a more forgiving arc burn.
SUREWELD 6010Sureweld 6010 is an all-position, quicksolidifying cellulosic type electrode with minimal spatter and excellent arc control. It offers deep penetration and easy removal of slag which allows single and multiple pass welds of x-ray quality.
SUREWELD 6011Sureweld 6011 is an all-position, cellulosic type electrode designed for AC. It produces an easily controlled forceful arc with deep penetration and a high quality weld metal which will pass specifica … [Read more]
SUREWELD 6013Sureweld 6013 is an all-position electrode. The arc is very stable even when low-voltage opencircuit transformers are used. The power of its arc allows depositing quick welds, medium penetration, and good appearance.
SUREWELD 7014Sureweld 7014 is an iron powder coated electrode permitting the use of higher welding currents while improving the deposition rate. The use of an iron-powder coating also improves deposition efficiency.
SUREWELD 7024Sureweld 7024 is a high speed, heavy-coated, iron powder electrode for high deposition rates on horizontal and downhand welding. Excellent operator appeal, produces equal 45° fillets, thereby eliminating over welding.
SUREWELD 710PSureweld 710P is an all-position cellulosic electrode that is especially suited for welding high strength pipe. It produces the consistent, deep penetration required to maintain a proper keyhole when vertical-down welding in open root pipe joints.
SUREWELD 810PSureweld 810P is an all-position cellulosic electrode that is especially suited for welding high strength pipe. It produces the consistent, deep penetration required to maintain a proper keyhole when vertical-down welding in open root pipe joints.
SUREWELD SW 14Sureweld SW-14 is an all-position cellulosic electrode designed for AC. It produces an easily controlled forceful arc with deep penetration and a high quality weld metal which will pass specification requirements for radiography.
WEAR-ARC 4 IPWear-Arc 4-IP is an all position, iron powder, low hydrogen hardsurfacing electrode providing sound overlays on carbon and low alloy steels, as well as many abrasion-resistant steels. The low hydrogen coating of this electrode promotes excellent fusion with the above steels and on buildup alloys without underbead cracking.
WEAR-ARC 6 IPThe iron powder low hydrogen coating of Wear-Arc 6-IP electrodes promotes good bonds with manganese and carbon steels. Wear-Arc 6-IP is recommended for the reclamation of parts subject to wear caused by abrasion and light impact.