RM 480

RM 480 GENERAL CHARACTERISTICS

  • Easy to use like a mild steel, but the tensile strength of a low hydrogen.
  • Almost no splatter and self lifting slag.
  • Runs great in all positions.
  • Superior performance on all power sources – any polarity.

TECHNICAL DATA

  • TENSILE STRENGTH UP TO 84,100 PSI
  • YIELD STRENGTH UP TO 73,300 PSI
  • ELONGATION UP TO 25%
  • AC/DC REVERSE POLARITY (DCEP)
    MSDS

APPLICATIONS

  • For general fabrication and repair of machine parts, frames, tanks and vessels.
  • Farm implements, earth moving equipment, piping and steel castings.
  • Welds thru rust, oil, paint and grease, where cleaning is impractical.
  • Use in tight places. When bending of the rod is necessary, the flux won’t break off.
  • Great for shaft build up work.
  • Excellent restrike characteristics make this an ideal electrode for short, intermittent or tack welds.
ORDERING INFORMATION PART # SIZE PACKAGE
RM 480 STICK ELECTRODE 4802.4
4803.2
4804.0
4805.0
3/32″
1/8″
5/32″
3/16″
10# TUBE
10# TUBE
10# TUBE
10# TUBE
RM 480FC FLUX CORED, LOW HYDROGEN DEPOSIT (CO2 OR 75/25 SHIELDING GAS) 480FC03511
480FC04511
480FC04533
.035″
.045″
.045″
11# SPOOL
11# SPOOL
33# SPOOL
RM 480M SOLID MIG WIRE (75/25 SHIELDING GAS) 480M02311
480M03011
480M03511
480M03533
480M04533
.023″
.030″
.035″
.035″
.045″
11# SPOOL
11# SPOOL
11# SPOOL
33# SPOOL
33# SPOOL
RM 480T SOLID BARE TIG FILLER 480T1.636
480T2.436
480T3.236
1/16 x 36″
3/32 x 36″
1/8 x 36″
10# TUBE
10# TUBE
10# TUBE
Deep penetration can be accomplished by using DC reverse polarity (DCEP). Limited penetration and a flatter bead will result from using DC straight polarity (DCEN). Maintain medium arc length with either stringer or weave beads.

Mind over Metals